Overview of the Simplified Brickwork House

The Simplified Brickwork house, also known as the Davis house, is a unique property type that emerged in the UK between 1934 and the 1950s. Designed by H Dyke and manufactured by Simplified Brick Construction Ltd, these homes were part of a broader movement to provide affordable and durable housing during a period of significant social and economic change. Approximately 700 of these properties were built, primarily as bungalows and two-storey semi-detached houses. They are characterized by their steep pitch gable roofs covered with concrete tiles and external walls made of brick or rendered throughout.

Historical Context and Manufacturing Details

Period and Location

The Simplified Brickwork houses were constructed during a time when the UK was grappling with the aftermath of the Great Depression and the onset of World War II. The need for cost-effective and quickly constructed housing was paramount. These homes were predominantly built in suburban areas, providing affordable housing solutions for working-class families.

Manufacturers and Designers

Simplified Brick Construction Ltd was the primary manufacturer of these homes, with H Dyke as the chief designer. The collaboration aimed to create a housing solution that was not only economical but also durable and easy to construct. The use of innovative materials and construction techniques was a hallmark of this design.

Typical Characteristics and Identification

Structural Features

• Roof: The Simplified Brickwork houses feature a steep pitch gable roof covered with plain concrete tiles. In some variants, the roof may be constructed with timber rafters and purlins.
• External Walls: The external walls are typically made of brick, cavity walls, or rendered throughout. Some variants include walls made of clay or concrete bricks, or no-fines concrete incorporating broken brick aggregate.
• Substructure: The foundation consists of a 5-inch concrete slab deepened to 9 inches below load-bearing walls, with the top of the floor slab positioned 18 inches below the damp-proof course (DPC) level.
• Ground Floor: Timber boarding on timber joists supported by precast concrete (PC) blocks.
• First Floor: Timber boarding on timber joists, supported at mid-span by a rolled steel joist (RSJ) encased in concrete. The RSJ also supports first-floor load-bearing partitions.
• Separating Wall: Foamed slag precast reinforced concrete (PRC) panel cavity wall, closed at both ends by 4-inch foamed slag concrete plugs.
• Partitions: Internal partitions are made of 3-inch and 4-inch foamed slag PRC slabs.

Identification Characteristics

• Bungalows and Two-Storey Semi-Detached Houses: These are the primary types of Simplified Brickwork houses.
• Steep Pitch Gable Roof: Covered with concrete tiles, this is a distinctive feature.
• Brick or Rendered External Walls: The external appearance can vary between brick and rendered finishes.

Typical Hazards and Risks

Structural Concerns

• Corrosion of Steel Reinforcement: Over time, the steel reinforcement within the concrete can corrode, leading to structural weaknesses. This is particularly prevalent in areas with high moisture levels.
• Carbonation of Concrete: The process of carbonation can reduce the alkalinity of concrete, leading to the corrosion of embedded steel reinforcement.
• Damp and Moisture Ingress: Due to the age of these properties, damp and moisture ingress can be common, particularly if the damp-proof course (DPC) has deteriorated.

Health and Safety Risks

• Asbestos: Given the period of construction, there is a possibility that asbestos-containing materials were used, particularly in insulation and roofing materials.
• Lead Paint: Older properties may have layers of lead-based paint, which can pose health risks if disturbed.

Defective Premises Act Considerations

The Simplified Brickwork house is not typically classified as defective under the Defective Premises Act. However, due to the age and construction methods used, it is essential to conduct thorough inspections to identify any potential issues that could affect the property’s safety and habitability.

Inspection and Assessment Guide

Pre-Inspection Preparation

Before conducting an inspection, it is crucial to gather as much information as possible about the property. This includes historical data, previous inspection reports, and any known issues. Familiarize yourself with the typical construction methods and materials used in Simplified Brickwork houses.

External Inspection

• Roof: Check for any signs of damage or wear on the concrete tiles. Look for missing or broken tiles and inspect the condition of the roof structure, including trusses and purlins.
• Walls: Examine the external walls for cracks, bulging, or signs of movement. Pay particular attention to the condition of the brickwork or render.
• Damp-Proof Course (DPC): Ensure the DPC is intact and functioning correctly. Look for signs of rising damp or moisture ingress.

Internal Inspection

• Floors: Inspect the ground and first floors for any signs of sagging, unevenness, or damage. Check the condition of the timber boarding and joists.
• Walls and Partitions: Look for cracks, bulging, or signs of movement in the internal walls and partitions. Pay attention to the condition of the foamed slag PRC slabs.
• Ceilings: Although the ceiling construction is not well-documented, inspect for any signs of sagging, cracks, or water damage.

Structural Elements

• Steel Reinforcement: Check for signs of corrosion in the steel reinforcement, particularly in areas exposed to moisture.
• Concrete Condition: Assess the condition of the concrete, looking for signs of carbonation or other deterioration.

Health and Safety

• Asbestos: If asbestos-containing materials are suspected, arrange for a professional asbestos survey and testing.
• Lead Paint: Test for the presence of lead-based paint and take appropriate precautions if it is found.

Typical Defects and Maintenance

Common Defects

• Corrosion of Steel Reinforcement: This can lead to structural weaknesses and should be addressed promptly.
• Damp and Moisture Ingress: Regular maintenance of the DPC and addressing any sources of moisture ingress can help prevent damp issues.
• Cracking and Movement: Monitor and repair any cracks or signs of movement in the walls and floors to maintain structural integrity.

Maintenance Tips

• Regular Inspections: Conduct regular inspections to identify and address any issues early.
• Moisture Control: Ensure proper drainage around the property and maintain the DPC to prevent moisture ingress.
• Structural Repairs: Address any structural issues promptly to prevent further deterioration.

Conclusion

The Simplified Brickwork house represents a significant period in the UK’s housing history, offering affordable and durable homes for many families. While these properties have stood the test of time, they do come with their own set of challenges and potential issues. By understanding the typical characteristics, hazards, and maintenance needs of these homes, buyers and investors can make informed decisions and ensure the longevity and safety of their investment.

At Flettons, we’re committed to safeguarding your investment. When considering a property purchase, trust our seasoned expertise to reveal any hidden threats. For a thorough building survey, get your instant quote through our quote calculator or reach out directly at 0203 691 0451. Your home’s safety is our top priority.

---